配件
3D Galvo Module
3D Laser Galvo – Curved & Height-Difference Engraving | Auto-Focus Marking (O.S.C)
Precision 3D Curved Surface Engraving
#CurvedProcessing
#HeightDifferenceEngraving
#DeepEngraving
#ReliefEngraving
#3DEngraving
#AutoFocus
#3DModel
✅ High-precision processing with minimal energy loss on large-area and curved surfaces
✅ Marking area up to 300×300 mm
✅ Maximum height difference up to 130 mm
✅ Adjustable focus enables deep engraving, relief engraving, and 3D applications
✅ Built-in models for cylindrical, spherical, and inclined surfaces for quick setup
✅ Supports 3D model engraving workflows
✅ Sample testing and on-site demonstrations available by appointment
※The 3D galvo module is an optional accessory and can be integrated with any laser source.
Fiber Laser Marking Machine
| Max Laser Power | 20W | 30W | 50W | 60W | 80W | 100W | 120W |
|---|---|---|---|---|---|---|---|
| Adjustable Frequency Range | 1–600 KHz | 1–600 KHz | 1–600 KHz | 1–4000 KHz | 1–4000 KHz | 1–4000 KHz | 1–4000 KHz |
| Pulse Width | 200 ns | 200 ns | 200 ns | 2–500 ns | 2–500 ns | 2–500 ns | 2–500 ns |
| Laser Wavelength | 1064 nm | ||||||
| Marking Area | 100×100 mm ~ 300×300 mm (optional) | ||||||
| Cooling Method | Air Cooling | ||||||
| Control Software | Optional | ||||||
| Galvo Head | High-speed galvo / Optional SCANLAB | ||||||
| Compatibility | Supports all Windows versions | ||||||
| Supported File Formats | Supports importing dwg, dxf, AI, plt, bmp, tif, cmp, cal, clp, cur, eps, emf, fpx, ico, wmf, psd, png, jpg, tga, pcx and more. | ||||||
| Standard Accessories | External red light, alignment red light, foot pedal | ||||||
| Power Consumption | 1 KVA | ||||||
| Operating Temperature | 0–40°C | ||||||
| Operating Voltage | Single-phase AC110V 50/60Hz / Single-phase AC220V 50/60Hz (with grounding required) | ||||||
UV Laser Marking Machine
| Max Laser Power | 3W | 5W | 10W |
|---|---|---|---|
| Adjustable Frequency Range | 20–150 KHz | 20–150 KHz | 40–300 KHz |
| Laser Wavelength | 355 nm | ||
| Marking Area | 100×100 mm ~ 300×300 mm | ||
| Cooling Method | Water Cooling / Air Cooling (Water cooling recommended if temperature & humidity cannot be well controlled) | ||
| Control Software | Optional | ||
| Galvo Head | Standard | ||
| Compatibility | Supports all Windows versions | ||
| Supported File Formats | Supports importing dwg, dxf, AI, plt, bmp, tif, cmp, cal, clp, cur, eps, emf, fpx, ico, wmf, psd, png, jpg, tga, pcx and more. | ||
| Standard Accessories | External red light, alignment red light, foot pedal | ||
| Power Consumption | 2 KVA | ||
| Operating Temperature | 25°C | ||
| Operating Voltage | Single-phase AC220V 50/60Hz (with grounding required) | ||
※Specifications are subject to change; please refer to the official quotation for final details.
